火控系统输出误差分离方法

本文提出的火控系统输出误差的分离法,为利用动态飞行试验数据评价火控系统及其火控系统子系统的性能提供了一种方法。     

样条有限点法分析板的非线性动力响应问题

本文提出了用样条有限点法分析板的几何非线性动力响应问题。采用了三次B样条函数与梁的振型函数的乘积作为试函数,由虚位移原理的动力方程出发,建立起以样条函数结点参数表示的基本方程,推导了非线性刚度矩阵的精确显式,并用wilson-θ法求解动力增量方程,求得挠度响应曲线。本文给出了算例,并与文献结果进行比较。本文提出的方法具有计算量小、精度高等优点。是十分有效的方法。     

机器人步行腿机构的动力分析

本文根据力的叠加原理,采用拆杆拆副法,对一平面闭式多杆步行腿机构进行了较为全面的动力分析,得出了一个运动循环内原动曲柄的输入力矩及各运动副处的约束反力线图,为该机构的驱动、控制及进一步的改型设计提供了必不可少的计算依据。线图分析表明:该机构节省能量,力学性能较好,有良好的应用前景。     

飞航导弹火控系统动态精度试验数据处理方法

飞航导弹火控系统动态精度试验后获得的导弹射击诸元误差序列一般为非平稳的随机过程,根据此误差特性,提出了动态测量数据的异常值数据处理方法,建立射击诸元误差序列、将误差序列分解为慢变化信号和高频噪声信号,最后给出火控系统射击诸元参数的最大误差统计估值方法     

硅整流无刷发电机供电系统动态性能的研究

分析了坦克的供电系统中采用硅整流无刷发电机时的工作特点,建立了这种系统的数学模型,举例说明了计算方法,并在文章的最后进行了评价.     

动力调谐陀螺随机速率漂移模型及其分析

应用典型相关分析,主成份分析和多因变量逐步回归分析方法,对陀螺仅随机速率漂移与温度的关系数推进行了分析。文中得出了一些有益的结论,并建立了陀螺仪随机速率漂移与温度相关的数学模型。     

弹性压应力波作用下直杆动力失稳的差分解

以受载端简支、远端固支弹性直杆为例,通过对直杆微元的动力平衡分析导出了直杆动力失稳的控制方程,这与用哈密顿原理得出的方程完全一致。利用差分方法求解了动力屈曲方程,解出了动力失稳模态以及临界力参数和动力特征参数的值。特别分析了随着动力特征参数由零增加到一定值后,由静力失稳模态过渡到动力失稳模态的过程。结果表明,对于等效长度直杆,动力失稳临界压力要远大于静力失稳的临界压力。     

考虑弹体动态特性的机动效率约束导引律

针对考虑交会角和过载约束导引律在大机动时能量损失大的问题,提出一种考虑导弹机动效率的多约束制导律。应用最优二次型原理推导出考虑一阶弹体延迟的时变导引系数闭环次优制导形式,将导弹机动时刻阻力系数引入时变权系数,并通过迭代确定机动效率约束边界。将时变约束表示成剩余时间与弹体延迟时间的函数,代入制导指令,进行弹道仿真。结果表明,对于常值与机动目标,文中制导律与过载约束导引律同只考虑交会角约束的导引律相比,对目标均能实现末端弹道成型要求,而考虑机动效率的制导指令分配更为合理,在避免指令加速度饱和的同时有效降低了拦截末端速度损耗,提高制导精度与毁伤效果。且该制导律中时变权系数无须配平求解,在保证精度的同时极大地提高了迭代速度。     

The impact of operational decisions on the design of salesforce incentives

When facing high levels of overstock inventories, firms often push their salesforce to work harder than usual to attract more demand, and one way to achieve that is to offer attractive incentives. However, most research on the optimal design of salesforce incentives ignores this dependency and assumes that operational decisions of production/inventory management are separable from design of salesforce incentives. We investigate this dependency in the problem of joint salesforce incentive design and inventory/production control. We develop a dynamic Principal‐Agent model with both Moral Hazard and Adverse Selection in which the principal is strategic and risk‐neutral but the agent is myopic and risk‐averse. We find the optimal joint incentive design and inventory control strategy, and demonstrate the impact of operational decisions on the design of a compensation package. The optimal strategy is characterized by a menu of inventory‐dependent salesforce compensation contracts. We show that the optimal compensation package depends highly on the operational decisions; when inventory levels are high, (a) the firm offers a more attractive contract and (b) the contract is effective in inducing the salesforce to work harder than usual. In contrast, when inventory levels are low, the firm can offer a less attractive compensation package, but still expect the salesforce to work hard enough. In addition, we show that although the inventory/production management and the design of salesforce compensation package are highly correlated, information acquisition through contract design allows the firm to implement traditional inventory control policies: a market‐based state‐dependent policy (with a constant base‐stock level when the inventory is low) that makes use of the extracted market condition from the agent is optimal. This work appears to be the first article on operations that addresses the important interplay between inventory/production control and salesforce compensation decisions in a dynamic setting. Our findings shed light on the effective integration of these two significant aspects for the successful operation of a firm. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 320–340, 2014     

基于数据站场的系统效能评估决策支持方法

随着信息技术的发展,系统信息量的提升给军事系统效能评估带来了新的问题。针对系统效能分析数据非线性、高维数、强耦合的特点,提出了一种基于数据站场技术的效能评估决策支持方法。通过数据恢复、约减、求精与重构操作,对评估数据进行了处理,并搭建了数据站场立方体,降低了数据间的依赖性,满足了不同层面系统分析的需求。以面向任务的网络化火控系统的为例,进行了系统效能评估、时效性评估和指标分析,从三个层次验证了方法的有效性与可行性。将数据挖掘技术应用到仿真系统效能评估决策中,获得了更广泛的应用。